ROME WARRIOR

ROME WARROR

Bass Guitar Distortion Preamp/Direct Box Highly Flexible Tone Active 6-band graphic EQ With a Headphone Out And Aux-In 

Specs

Control

Blend: Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.

Level: Sets the volume of the overdriven signal.

Drive: Sets the amount of gain in the overdriven signal.

Bite: Boosts High Mids (2.8kHz) for additional presence and definition.

Growl: Shelving Bass Boost for a fatter tone and increased low end saturation.

Mod: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.

Master: Whereas the Level knob control the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control. Please note that volume is not affected by this control when the pedal is on bypass.

Bass: Low shelf +-12dB @ 80 Hz

Mid bands: +-10dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz

Treble: High shelf +-12dB @ 5 kHz

Technical Specifications

Input Impedance: 500kΩ

Output Impedance: 1kΩ

Current Consumption: ~130mA

Voltage: 9V DC (Center Negative)

Dimensions

Width: 95 mm

Length: 120 mm

Height: 50 mm 

Packing Weight: 490 g

Warning

The Pedal has a current draw of 130mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.