SGA
Bass Preamp/Direct Box Highly Flexible Tone With a Headphone Out And Aux-In
1.Top Panel:
Gain - Controls input sensitivity level
Treble - +/- 14 dB @ 4 kHz
Bass - +/- 17 dB @ 40 Hz
High Mid - +/- 14dB @ 800 Hz
Low Mid - +/- 15 dB @ 300 Hz
Volume - Controls output level
Engage - Toggles between on/bypass (blue LED indicates on)
Bright/Deep - Toggles through broadband “Deep”, “Bright”, or “Deep + Bright” (blue LED indicates on) The
frequencies for the boosts are:
Deep: +6 dB <250 Hz, shelving Bright: +6 dB >3 kHz, shelving
Headphone Mix - Controls mix of bass signal and aux-in in headphones
2. Top Side Panel:
In: 1/4” input
Aux In: 1/8” aux input for music device
Out: 1/4” output
Headphones Out: 1/8” headphones output
DC IN: 18v. This is a standard 2.1mm DC jack. The center terminal polarity is negative.
3. Left Side Panel:
DI Out: XLR balanced DI out
Pre/Post Control:
Pre: Your signal goes to the D.I. XLR output before your Gain and EQ settings
Post: Gain, EQ, and Master settings will be sent to the D.I. XLR output jack.
Ground Lift Control: If there is a hum when using the D.I, there may be a ground loop. In many cases,
pushing in the Ground/Lift button can fix this problem.
Specifications
Current consumption:............................. 36 mA
Input impedance: ..........................................1mega Ohm
Output impedance: .........................................1k
External DC Power: ………………………18v DC
Clean and transparent Preamp
4-Band EQ – Bass, Treble, Low Mid, Hi Mid
Footswitchable “Deep” and “Bright” broadband boost
Headphone out and Aux in for silent practice
Studio Quality DI w/ Pre and Post as well as Ground Lift
Power: 18v power supply-center negative
Inputs: One 1/4″ jack, One Aux In
Outputs: One 1/4″ jack, One XLR (nominal output – 14 dBu balanced), Headphone Out
Contact:Terry
Phone:18682010696
Tel:086-18682010696
Email:info@moskyaudio.com
Add:广东省深圳市宝安区